RU
EN
/
INNOVATIONS TO TRANSFORM THE MARINE INDUSTRY
Pneumatic source controller
Gun_controller – RGC-4
The Gan controller - RGC–4 is designed to create control signals that activate pneumatic sources of elastic vibrations, while ensuring control of the response time and electrical characteristics of lines and actuators of pneumatic sources, visualizing and recording the data obtained; in addition, it must ensure the performance of seismic surveys in marine and transit (shallow water and transit zones) conditions using towed and bottom seismic braids.
It is used in the field of seismic surveys in marine and transit (shallow water and transit zones) conditions using towed and bottom seismic braids.

Appointment

The Gan controller - RGC–4 is designed to create control signals that activate pneumatic sources of elastic vibrations, while ensuring control of the response time and electrical characteristics of lines and actuators of pneumatic sources, visualizing and recording the data obtained; in addition, it must ensure the performance of seismic surveys in marine and transit (shallow water and transit zones) conditions using towed and bottom seismic braids.
It is used in the field of seismic surveys in marine and transit (shallow water and transit zones) conditions using towed and bottom seismic braids.

The principle of operation of the device

The shots are synchronized by a signal with 3V/5V levels via a coaxial BNC connector. The power is supplied from a 220V network. The power consumption is 10 watts. Communication with the air gun goes through 2 cables: a control cable goes to the air gun, and a air gun trigger signal cable comes from the pushkin. During the shot, the current of the air gun, the voltage on the air gun and the opening signal of the air gun for each channel are recorded. The registered data is issued via a USB cable to a PC. The program on the PC controls the Gan controller and writes the registered data to a file.

Technical specifications


Main Features
  • The manufacturer is SPLIT LLC. Russia
  • Power supply - AC220V
  • Power consumption — 10 watts
  • Communication with the gun is via 2 cables
  • The discreteness of the delay time setting is 1 microsecond
  • Output pulse voltage 90V
  • The interface for setting/transferring parameters is USB 2.0.